Infrared sauna cabin configurator: compare the emitter layout with the seating position
An infrared-sauna configurator should help customers see where the panels sit in relation to the benches. The cabin finish is only one part of the equipment discussion and should not obscure that arrangement.
Compare the emitter layout with the seating position
Compare carbon and ceramic panel appearances with rear or L-shaped seating. Inspect the side, rear and calf-panel references alongside protective timber guards. Review the door, glazing and lighting from inside the cabin so the customer can describe the complete visual preference.
Rear bench or seating with a left return?
Compare the seated position against the rear, side and calf-panel references. Carbon and ceramic appearances should be discussed separately from glazing and lighting. The visual emitter arrangement is an equipment choice, not evidence of a health benefit or the electrical characteristics of a supplied cabin.
Compare seating and panel appearance before the palette
A full-width rear bench and a left return create different interior arrangements. Review them with the entrance visible before selecting timber. Flat carbon-panel and vertical ceramic-emitter appearances should be named as equipment preferences, not used as shorthand for a promised health result.
Keep the glazed or timber-front entrance choice with the hinge side and seating. Record wall and bench materials separately from lighting and hardware. The customer can then approve a coherent cabin design while the supplier confirms the actual equipment and installation requirements.
Infrared sauna cabin options to compare
Review the selected model before refining individual details. Available choices can change with the model and earlier selections; the groups below describe the current starting configuration.
Dimensions
- Cabin width
- 1400–2400 mm in the current model
- Cabin depth
- 1300–2000 mm in the current model
- Cabin height
- 2000–2350 mm in the current model
Interior
- Seating arrangement
- Full-width rear bench
- Rear bench and left return
- Bench depth
- 430–570 mm in the current model
- Slatted backrest
- Include or omit
- Timber headrests
- Include or omit
Radiant panels
- Radiant panel appearance
- Flat carbon panels
- Vertical ceramic emitters
- Rear radiant panel count
- 2–5 in the current model
- Side radiant panels
- Include or omit
- Under-bench calf panel
- Include or omit
- Timber panel guards
- Include or omit
Glazing
- Entrance arrangement
- Glass door and sidelights
- Timber front with glass door
Lighting
- Ceiling light diffuser
- Include or omit
- Concealed bench lighting
- Include or omit
- Light appearance
- Warm white
- Neutral white
Accessories
- Ceiling speaker grilles
- Include or omit
- Recessed control panel
- Include or omit
- Bucket, ladle and thermometer
- Include or omit
Materials
- Wall timber appearance
- Warm cedar
- Thermowood appearance
- Pale Nordic timber
- Bench timber appearance
- Pale aspen appearance
- Thermally treated timber
- Hardware finish
- Graphite
- Bronze
- Brushed silver
- Glazing tint
- Clear
- Smoked
- Bronze
Door
- Entry hinge side
- Left
- Right
Dimension ranges describe the current model controls. Confirm the selected product, final measurements and supplied specification with the manufacturer.
Worked example: a customer brief for infrared sauna cabin
For a wellness-room purchase discussion, save the preferred seating and two entrance preferences. Inspect guards, panels and controls. Identify the selected cabin and equipment references on the proposal, with actual installation and operating information obtained from the manufacturer.
From infrared sauna cabin choices to a clear proposal
Record the selected cabin, seating and equipment references in the proposal. Actual electrical characteristics, installation requirements and any product claims must come from the manufacturer. A visual emitter arrangement should not be presented as a health benefit or a measured treatment outcome.
Questions for your infrared sauna cabin review
- Seating position
- Emitter references
- Glazing and lighting
- Manufacturer equipment information
Useful views for the infrared sauna cabin review
Use these inspection views to discuss the arrangement and visible details before approving the specification.
- Interior and panel placement
- Radiant panel and protective grille
- Bench joinery
- Glass entry and hinges
Infrared sauna cabin configurator FAQs
Can the guide promise a health outcome?
No. The configuration describes product appearance and layout. Health claims need appropriate evidence and are not established by the rendered cabin.
What makes a useful infrared cabin design brief?
Agree the cabin arrangement, entrance and seating, then record the selected panels and finishes. Keep the actual equipment specification and intended use explicit. The visual design discussion should not become a promise about medical benefits or treatment outcomes.
Put the choices
in the same view.
Explore the infrared sauna cabin configurator, review the available product options and discuss your own range with our team.